Luna and Associates

To prime or not to prime, That is the question – September 2016

Posted by admin 
· August 30, 2016 

There seems to be more questions that arise about primers used with peel and stick material for below-grade waterproofing and air and vapor barriers. Should you prime or is it really necessary? No matter the experience of the manufacture, the sub-contractor, or the general contractor, priming the surface can be a critical step to a successful application. The better the…

Read More→

ANSI/SPRI ES1 Testing – August 2016

Posted by admin 
· July 31, 2016 

ANSI/SPRI ES1 testing for perimeter metal fascias and copings have been a part of the IBC building code for quite some time. On May 26, 2016, a similar approval has been done for gutter systems called ANSI/SPRI GT1. This testing is done to confirm the perimeter metal’s capability to perform in wind and pressure conditions that can occur based upon…

Read More→

Carlisle Announced VapAir Seal Flashing Foam – July 2016

Posted by admin 
· July 1, 2016 

Carlisle SynTec is pleased to introduce VapAirSeal Flashing Foam, a spray polyurethane foam (SPF) used in conjunction with Carlisle’s Air and Vapor Barriers. This flashing foam allows contractors to seal around penetrations quickly and effectively, creating a seamless, continuous seal that provides insulation and protects against air and vapor infiltration. The VapAirSeal Flashing Foam is compatible with VapAir Seal MD,…

Read More→

Carlisle’s Perfection Award – Missouri Builders Service

Posted by admin 
· June 2, 2016 

Carlisle maintains detailed records of every Authorized Applicators’ warranty claims history. Each year, the Perfection Award will recognize those roofers whose exceptional installation quality results in a warranty claim performance that ranks in the top 5% of all US and Canadian applicators.

NFPA 285 App by Carlisle Coatings and Waterproofing – June 2016

Posted by admin 
· May 26, 2016 

The CCW NFPA 285 animation app on the Carlisle Coatings and Waterproofing website has been developed to help design professionals offer wall assemblies options that comply with the NFPA 285 test. Combined with extensive product testing and design, this guide can help a designer choose from over 2,000 possible NFPA approved wall assemblies. After working through the interactive animation portion…

Read More→

Carlisle’s Perfection Award

Posted by admin 
· May 24, 2016 

Each year, the Perfection Award will recognize those roofers whose exceptional installation quality results in a warranty claim performance that ranks in the top 5% of all US and Canadian applicators.

May 2016, Metal Era

Posted by admin 
· April 28, 2016 

Luna & Associates is proud to announce our new partnership with Metal Era in Iowa, Nebraska, Kansas and Western Missouri. Based just outside of Milwaukee in Waukesha, WI, Metal Era has been a leader in metal edge design and fabrication since their inception in 1980. Their geographic proximity to the areas Luna & Associates serves, allows them to provide quality…

Read More→

April 2016, CCW Barribond: Liquid Flashing & Detail Sealant

Posted by admin 
· April 4, 2016 

Carlisle Coatings & Waterproofing recently introduced Barribond sealant for use with all CCW Air Barrier products. Depending on construction progression, this innovative product can be applied over or under all CCW Sheet Applied and Liquid Applied Air Barrier products. BarriBond may also be used as a termination mastic over CCW Self-Adhered Sheet Flashing Membranes. BarriBond is a high-solids, silane-terminated polyether…

Read More→

March 2016, CCW MiraStop

Posted by admin 
· February 26, 2016 

A butyl rubber and expandable bentonite clay waterproofing joint compound. Bentonite waterstop plays a critical role in any below grade waterproofing system. Waterstop should be installed at all non-moving cold pour joints and all construction/control joints: i.e. joints between footings and walls, vertical construction joints and all joints between pours. Bentonite waterstops require minimum 3” of concrete coverage. These products…

Read More→

February 2016, Polyisocyanurate Roofing Insulation Classifications

Posted by admin 
· January 26, 2016 

Specifying Polyisocyanurate (ISO) is an important design consideration for ensuring long term roof performance. But there can be confusion within the product standard ASTM C1289, which references the type, class and grade of ISO. Below is a comprehensive chart to help in choosing the right ISO insulation. As always, if you have any questions or you would like to discuss…

Read More→

« Previous Page
Next Page »

Recent News

Contact Us

  • This field is for validation purposes and should be left unchanged.

Newsletter Signup