Luna and Associates

Monty Smoot Announces his Retirement

Posted by admin 
· March 28, 2018 

Monty Smoot, with Luna & Associates, has announced his retirement. His last day will be Thursday, March 29th. Many of us have worked with Monty for more than 25 years and he will be missed!!!

2018 St. Louis Architectural Design Conference

Posted by admin 
· March 28, 2018 

Luna & Associates held an Architectural Design Conference yesterday at the Hilton-St. Louis Frontenac Hotel. We had 70 attendees, and had fantastic speakers from Carlisle SynTec, Carlisle Coatings & Waterproofing, Cascadia and Kingspan Light + Air! It was a very educational day and we enjoyed seeing our Architects, Consultants, General Contractors and Sub Contractors in attendance. A special thanks to…

Read More→

Kansas City CSI Expo, February 8, 2018

Posted by admin 
· February 14, 2018 

Denies Shibley (pictured) and Eric Englert attended the CSI Expo at the Kansas City Marriott on February 8, 2018. Stop by our booth and see them next time!

Pre-Compressed Expansion Joints, February 2018 Monthly Mailer

Posted by admin 
· February 1, 2018 

PreCom Type C – Is a hydrophobic acrylic impregnated polyurethane foam with a factory applied silicone facer designed for expansion joints that require an aesthetically pleasing appearance while remaining water tight with a wide expansion/contraction range. The product comes pre-compressed which enhances the ease of installation. Seams and edges are then sealed with silicone sealant matching the joint facer. As…

Read More→

IRCA, January 26, 2018

Posted by admin 
· January 29, 2018 

Luna & Associates was proud to be at the IRCA Winter Meeting last week. Stop by our booth and see us next time!

Cav-Grip III Adhesive, January 2018 Monthly Mailer

Posted by admin 
· January 2, 2018 

Carlisle SynTec Systems is pleased to announce that starting in 2018 Cav-Grip III Adhesive is approved for field of the roof use with TPO. Additionaly, Cav-Grip III will be approved for EPDM wall applications. This new generation adhesive will still be approved for both FleeceBACK and TPO wall applications. This is a great option if the odors from solvent based…

Read More→

Carlisle’s CAV-GRIP III Low-VOC Adhesive/Primer – January 2019 Monthly Mailer

Posted by admin 
· January 1, 2018 

Carlisle’s CAV-GRIP III Low-VOC Aerosol Contact Adhesive/Primer can be used for a variety of applications: Adhering vertical walls using FleeceBACK®, Sure- Weld® TPO, or Sure-Seal® EPDM. CAV-GRIP III IS NOW APPROVED FOR USE WITH STANDARD TPO AND EPDM MEMBRANES AS A SUBSTRATE ADHESIVE FOR WARRANTIES UP TO 20 YEARS. Enhancing the bond between Carlisle’s VapAir SealTM 725TR and various substrates…

Read More→

Carlisle’s Hunger Heros 2017

Posted by admin 
· December 11, 2017 

Luna & Associates participated at the Carlisle SynTec sales meeting to pack food and made 60,000 meals, along with other reps and distributors with Carlilse.

Non Halogenated Flame Retardant Polyiso Insulation, December 2017 Monthly Mailer

Posted by admin 
· December 1, 2017 

NON HALOGENATED FLAME RETARDANT POLYISO INSULATION Polyisocyanurate insualtion is the most commonly used component of the commercial roofing industry. Over the years technological advances have brought an evolution of this product in both the internal foam and external facer to increase its performance characteristics. One of those key performance characteristics is flame resistance. Historically these characteritics have been achieved using…

Read More→

Specifier Monthly Newsletter, November 2017

Posted by admin 
· November 1, 2017 

Polyisocyanurate Insulation Job Site Storage Guidelines Winter is right around the corner, which means, delivered materials may need to be stored for longer periods of time on jobsites.  Units of polyiso insulation are particularly difficult to relocate from a jobsite due to size and qualities. As polyiso insulation bundle packaging is intended for transportation only, the following precautions are required…

Read More→

« Previous Page
Next Page »

Recent News

Contact Us

  • This field is for validation purposes and should be left unchanged.

Newsletter Signup